ASMB58A-VR
50000 in stock
-
(Ratings at 25°C ambient temperature unless otherwise specified.)
Parameter Symbol Value Unit
Peak Power Dissipation with a 10/1000 μs waveform(1)(2)(Fig.2)-Single Die Parts PPPM 600 W
Peak Power Dissipation with a 10/1000 μs waveform(1)(2)(Fig.2)-Stacked Die Parts(5) PPPM 800 W
Peak Power Dissipation on Infinite Heat Sink at TL=50 °C PD 5.0 W
Peak Forward Surge Current,8.3 ms single half sinewave superimposed on rated load
(JEDEC Method)(3) IFSM 100 A
Maximum Instantaneous Forward Voltage at 50 A for Unidirectional Only(4) VF 3.5 / 5.0 V
Operating Temperature Range TJ -65 to 150 °C
Storage Temperature Range TSTG -65 to 175 °C
Typical Thermal Resistance Junction to Lead RθJL 20 °C / W
Typical Thermal Resistance Junction to Ambient RθJA 100 °C / W
₹6.20
50000 in stock
CompareMfr Part no – ASMB58A-VR
Brand – SETFUSE
Description
Transient Voltage Suppressor (TVS) is a circuit protection
component that either attenuates (reduces) or filters a
transient voltage spike (overvoltage), TVS diodes provide
critical protection by going into avalanche breakdown
within no more than a few nanoseconds after a strike,
clamping the transient voltage, and routing its current to
the ground.
Technical Specifications
● AEC-Q101 Qualified
● Low incremental surge resistance
● Excellent clamping capability
● Low profile package with built-in strain relief
● Typical IR less than 1.0 μA above 12 V
● 600 W peak pulse power capability with a 10/1000
μsWaveform, repetition rate (duty cycle): 0.01%
● For surface mounted applications to optimize board space
● Typical failure mode is short from over-specified voltage
or current
● IEC 61000-4-2 ESD 30 kV (Air), 30 kV (Contact)
● EFT protection of data lines in accordance with IEC 61000
-4-4
● Very fast response time
● Glass passivated chip junction
● High temperature to reflow soldering guaranteed: 260
°C/30 sec
● VBR @ TJ= VBR@25 °C x (1+αT x (TJ – 25))
(αT:Temperature Coefficient, typical value is 0.1%)
● Plastic package is flammability rated V-0 per Underwriters
Laboratories
● Meet MSL level1, per J-STD-020
● Matte tin lead–free plated
● Halogen free and RoHS compliant
● Pb-free E3 means 2nd level interconnect is Pb-free and
the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-
609A.01)
Peter Wargner –
Sed id tincidunt sapien. Pellentesque cursus accumsan tellus, nec ultricies nulla sollicitudin eget. Donec feugiat orci vestibulum porttitor sagittis.
Peter Wargner –
Anna Kowalsky –
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Suspendisse eget facilisis odio. Duis sodales augue eu tincidunt faucibus. Etiam justo ligula, placerat ac augue id, volutpat porta dui.
Anna Kowalsky –
John Doe –
Fusce vitae nibh mi. Integer posuere, libero et ullamcorper facilisis, enim eros tincidunt orci, eget vestibulum sapien nisi ut leo. Cras finibus vel est ut mollis. Donec luctus condimentum ante et euismod.
John Doe –